I was assuming you were removing the old deck and starting new, since the joists are not long enough to extend any further out. If you are keeping the existing deck, you basically will do the same thing but now the new joists will attach to a new ledger, attached to the front of the existing deck.
Article about extending an existing deck by installing new posts and adding a row of deck joists. without footings or ledger boards. Like: smooth surface. No nail heads to eventually pop-up and trip on. Article about extending an existing deck by installing new posts and adding a row of deck joists.
To extend a deck 17 from a house with traditional girder construction, youd need to upgrade all the joists and the ledger from 2x8s to 2x10s.² This brute force approach would add approximately $4 more per joist; for a deck 16ft wide including the 17 joists, ledger, rim joist, blocking, and joist hangers at the girder that amounts to an
Extend deck with out new posts. Whether the hot tub can be held is a function of the specific geometry of your deck, and cannot be answered without detailed information regarding the specific sizing and connections of structural elements on your deck, the proposed location of the tub, local code loading requirements, and knowledge of the
A deck makes a great home improvement addition to almost any backyard. However, building a deck can become a time-consuming chore if you must dig holes and pour concrete to set your deck posts. Fortunately, there's a simple, cost-effective way to build a deck without digging holes. Construct a
Post caps come in different configurations, but for post joining applications, the post cap should have two equal sections or sleeves: One side slips over the end of a post on one side, and the
I am thinking about extending my existing deck, 10 ft wide by 18 ft long and replacing the deck boards with composite decking. I would like to know how far can I extend the deck width without adding another beam at the end of the joists?
If you can extend the cantilever by adding joists of the existing size then you will save a lot of time and effort. But you may find that the effort required to add another support beam closer to the new edge of the deck and then just removing the old post and beams isn't such a headache.